A4988 driver Stepper Motor Driver- Normal Quality

The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow. The driver includes a fixed off-time current regulator and can be in slow or mixed decay mode. The chopping control in the A4988 automatically selects the current decay mode (slow or mixed) during stepping operation.

• Avoid Motor Connection/Disconnection While Driver Is On: Do not connect or disconnect the motor while the driver is turned on to prevent system damage.

• Operate Within Voltage Range: Operate the A4988 driver within the voltage range of 8 V to 35 VDC.,
• Use Proper Cooling: Use a heat sink or forced air flow if operating at higher currents to prevent overheating.

• Min: 1 A,
• Max: 2 A

• Min: 8 V,
• Max: 35 V

• Interface: The A4988 driver Stepper Motor Driver interface is suitable for a complex microprocessor that is not available or overloaded.

0.90 mm

QFN package (ES)

5 mm × 5 mm

Exposed thermal pad for heat dissipation