JoyStick Shield Module Robotics Control

The JoyStick Shield Module Robotics Control is designed to turn an Arduino Uno or compatible board into a game console or robotic controller. It features a 2-axis joystick, 7 momentary push buttons, and interfaces for Bluetooth, I2C, nRF24L01, and Nokia 5110 LCD.

2-Axis Joystick

Buttons

Bluetooth Connector

I2C Connector

nRF24L01 Connector

Nokia 5110 LCD Connector

• Do Not Exceed The Recommended Input Supply Voltage Range.: Do not use both the nRF24L01 and Nokia 5110 LCD interfaces simultaneously as they share the same pins.

• Use The Shield With Arduino Uno Or Compatible Boards Within The Specified Input Supply Voltage Range Of 3.3v To 5v.: Ensure proper connections of the joystick, buttons, and interfaces as per the provided information.

3.3V to 5V

• Rx/Tx Lines: 4-pin female header,
• 3.3v And Ground: 4-pin female header

• Button A: D2,
• Button B: D3,
• Button C: D4,
• Button D: D5,
• Button E: D6,
• Button F: D7

• Sda And Scl Lines: 4-pin male header,
• 5v And Ground: 4-pin male header

• Dual Row Yellow Male Header Connector: Provides access to all buttons, joystick pots, 3.3V, 5V, and Ground

• X-Axis Potentiometer: A0,
• Y-Axis Potentiometer: A1,
• Button 'K': D8

• Interface: D9-D13 pins

• Gnd: Ground,
• Vcc: 3.3V,
• Ce: D9,
• Csn: D10,
• Sck: D13,
• Mosi: D11,
• Miso: D12,
• Irq: No Connection

30

87

37

53