1M WS2812B 5V Addressable RGB Non-Waterproof LED Strip Light 60LED’s/Mtr.

The 1M WS2812B 5V Addressable RGB Non-Waterproof LED Strip Light 60LED’s/Mtr allows each LED of the strip to be controlled separately using a microcontroller. The strip features WS2812B LED/driver ICs, which enable higher LED densities and use a specialized one-wire control interface.

WS2812B LED/driver ICs

• Avoid Collisions Or Crushing: To prevent damage to the strip.,
• Do Not Connect Or Disconnect While Powered: To prevent potential damage to the circuit.,
• Minimize Wire Length Between Microcontroller And Strip: To reduce interference and noise.,
• Do Not Fix On Sharp Edges: To prevent damage to the LED components.

• Install On Smooth, Clean, And Dry Surfaces: To ensure proper adhesion and functionality.,
• Cut Along Designated Lines: To separate the strip into usable sections.,
• Use A 100 Μf Capacitor Between Ground And Power Lines: To protect the WS2812B from damage.,
• Power The Strip Using Auxiliary Power Wires: For convenient and efficient power distribution.

• Issue: As chains of LED strips get longer, the ends may become dimmer and redder due to voltage drop.,
• Solution: Power shorter subsections separately if voltage drop becomes an issue.

• Ground (White) Wire: Connect to microcontroller ground.,
• Signal Input (Green) Wire: Connect to microcontroller I/O line.,
• Power Using Auxiliary Wires: Connect to 5V power supply for efficient power distribution.

1 meter

2.36 mm

12 mm