High Temperature NTC 100K Thermistor with 1 Meter Cable

The High Temperature NTC 100K Thermistor is a type of thermally sensitive resistor that exhibits a significant change in resistance with a small change in temperature. It operates on the principle that its resistance decreases as the temperature increases, which is characteristic of Negative Temperature Coefficient (NTC) thermistors.

NTC (Negative Temperature Coefficient)

• Avoid Exceeding Temperature Limits: Do not use the thermistor beyond its specified temperature range of -30°C to 350°C to prevent damage or inaccurate readings.,
• Do Not Modify Cable Unnecessarily: Avoid unnecessary modifications to the white high-temperature cord to maintain its integrity and performance.

• Use With Appropriate Heat Block: This thermistor should only be used with a high-temperature heat block, which is not included in the package.,
• Consider For High Temperature Filaments: It is highly recommended for printing high-temperature filaments due to its extended temperature range up to 350°C.

• Max Power Output: 0.4 Watts,
• Dissipation Power Factor: ≥5 mW/°C (static in the air)

• Description: The thermistor can measure temperatures from -30°C to 350°C.

• Description: The thermistor comes with a 1-meter cable that can be connected to the control system of a 3D printer. Ensure that the connections are secure and that the thermistor is properly positioned within the heating block to ensure accurate temperature measurements.

20 mm

8 × 5 × 4 cm

0.01 kg

6 grams

3 mm (Sensor Diameter)